From Castle Hill Residents Information

Main: UnofficialDesignSuggestions

Table of Contents

General Construction

Roof Lines

When you design your house please be aware of the impact your roof line will have on neighbours views and the shading and frosting that your roof could have on their properties. On the shortest day the shadow cast is twice the height of a roof ridge. Ie: 8 metre high roof casts a 16 metre shadow. Most sections are 20 to 25 metres wide.

North Aspect/Passive Solar/Thermal Mass

Given the generous number of sunny days experienced at Castle Hill, a good passive solar design coupled with decent thermal mass can have great benefit. Part of this can include analysing sun angles at various times of the year using computer software.

Feel free to contact Conor Boyd for more information on using e.g. Google Earth and other modelling/rendering software to analyse sun angles.

Or see the SmarterHomes website for more information on Passive heating, Thermal mass, and appropriate Orientation.

Wall cladding

If wall cladding such as plywood products is used there is benefit in having more nailing than normally specified because of the intense summer and winter temperatures – a rule of thumb is to double the nailing quantity on the bottom edge of the sheets of plywood to minimize any warping or cupping of the plywood – especially if the wall surface is stained dark.


Consider thicker wall framing (e.g. 150mm instead of 100mm) to enable higher R-value wall insulation to be installed.


The most effective fastening of planking is to skew nail the planks, or screw them. Vertical nailing tends to loosen as the timber planks move in the heat of summer. For the same reason, hardwood decking timber (e.g. Kwila and the like) may be considered as well.


Toby box freezing

In heavy frosts the water can freeze at the water valve positioned in the blue Toby box located on the boundary of your section. There appears to be benefit in insulating the Toby box cavity with something like batts or pebbles wrapped in plastic. If your water does freeze at this point blowing a hot hair dryer over the valve very quickly melts the ice.

Plumbing on exterior walls

To minimize the possibility of pipes freezing it is prudent to not install water pipes in un-insulated roof spaces, or on outside walls.

Draining water pipes over winter

If a house is to be vacated for extended periods over winter there is benefit in draining the water pipes. Pipes should be installed with a slope down to drain valves that discharge drained water outside the house.

Toilet bowls can freeze and fracture.

Toilet water bowls can freeze and fracture in very cold spells. Apparently this can be minimized by placing a tennis ball in the water bowl if the house is going to be unattended over winter.



Wiring your house to allow a 2kva generator to be connected to the switch board provides the opportunity to function in an extended power outage.

Heating and ventilation

Heat transfer systems

This includes both heat recovery systems (such as HRV) and internal heat-transfer systems (such as Securimax/Heat Trans).

Transferring heat generated in an un-insulated roof space from solar gain into a house has benefits of:

Both types of system also help distribute heat generated from a log burner throughout the house due to the turbulence created by the airflow.

Insect screens

Insect screens fitted to windows allow the interior of a house to be well ventilated in late spring, summer and early autumn without the need for a heat pump. Screens may only need to be installed on one or two windows on each side of a house to provide sufficient air flow to cool the internal spaces.

Wood storage

There is much benefit in having under cover wood storage designed into the initial house design. A log burner can burn up to 15 cubic metres per annum if a house is continuously used. Ideally store wood for 12 months to allow it to dry thoroughly.

Retrieved from
Page last modified on November 15, 2013, at 09:16 PM